With the help of our team of dexterous professionals, we manufacture and supply optimal quality Polyurethane paint. The offered paint is precisely processed using supreme quality polyurethane and advanced processing techniques. It is used to provide excellent finish on variety of substrate such as steel, Aluminum, FRP and other plastics, ply wood, hard wood concrete etc. Our quality experts firmly test this Polyurethane paint to ensure optimum quality. Furthermore, we offer this paint in various packaging option at reasonable prices.
Features:
Effectiveness
Good chemical resistance
High viscosity
Accurate composition
RECOMMENDED USAGE
Volume Solids | 40 -45 % |
Mixing Ratio Base: Hardner | 3 : 1 by volume |
Recommended D.F.T. | 40 - 50 microns |
Theoretical Coverage at given D.F.T. | 8.0-11.0 sq.mt/ltr |
Technical Specifications
Type | Two Pack |
Color | In desired shades. |
Gloss | Glossy |
Pot Life | 4 - 6 hrs. at 30oC |
Curing Mechanism | Solvent release and chemical reaction between Base and Hardner |
Flash Point | Not below 25oC |
Drying Time(30oC) | |
Surface Dry | Max. 1 hr |
Hard Dry | 16 - 18 hrs. |
Re-coating Interval | Min 16 hrs. |
Thinner | Emperol P.U.Thinner |
Thinner Consumption Brush | 0 - 5 % |
Conventional Spray | 5 - 15 % |
Suitable Over-coating | Conventional, N.C., Acrylic, Chlorinated Rubber, Polyurethane etc. |
Applied Over | Primed surface. |
Application Method | Brush / conventional spray. |
Shelf Life | 6 months in a sealed container under normal storage conditions. |
SURFACE PREPARATION
Primed surfaces must be clean, dry, and free from moisture, grease, and other contaminants.
SPECIAL INSTRUCTION
Thinner consumption may vary depending upon site conditions. Practical covering capacity depends on application techniques, ambient conditions, wastage, surface condition etc. Surface temperature must be 30C above Dew Point to prevent condensation.
EMPEROL COLOURS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |