Epoxy Polyamide Primer
Product Details:
X
Epoxy Polyamide Primer Price And Quantity
- 200 Kilograms
Epoxy Polyamide Primer Trade Information
- Cheque Cash Advance (CA)
- depend on Order Per Month
- As per requirement Week
- Yes
- Sample costs shipping and taxes has to be paid by the buyer
- Polybag
- All India
- ISO 9001: 2000 Certified Company
Product Description
Clients can avail from us high quality Epoxy Polyamide Primer that is processed from high grade chemicals and zinc chromate pigment. It is a heavy duty protective primer recommended for protection of structural steel, equipments, conveyors, storage tanks etc. Our team of quality controllers test this paint on various defined parameters to ensure its effectiveness. The offered Epoxy Polyamide Primer is available in different packaging options as per the needs of the clients at affordable prices.
Features:
-
Accurate composition
-
Purity
-
Safe to use
-
Longer shelf life
RECOMMENDED USAGE
| Volume Solids | 37+3 % |
| Mixing Ratio Base: Hardner | 3 : 1 by volume |
| Recommended D.F.T. | 30 - 40 microns |
| Theoretical Coverage at given D.F.T. | 9.0-12.0 m2/ltr |
Technical Specifications
| Type | Two Pack |
| Color | Red oxide / Yellow |
| Gloss | Matt |
| Induction Time | 30-45 mins |
| Pot Life | 6 -8 hrs. at 30oC |
| Curing Mechanism | Solvent release and chemical reaction between Base and Hardner |
| Flash Point | Not below 25oC |
| Drying Time(30oC) | |
| Surface Dry | 20 - 30 minutes |
| Hard Dry | 16 - 18 hours. |
| Curing Time | 7 days |
| Re coating Interval | Min 16 hrs. Max 5 days |
| Thinner | Emperol Epoxy Thinner |
| Suitable Over coating | Chlorinated Rubber,Epoxy or Polyurethane coating. |
| Applied over | Blast cleaned M.S.surface. |
| Application Method | Brush / Conventional spray |
| Shelf Life | 12 months under normal storage conditions in original sealed container. |
SURFACE PREPARATION
Before application of the primer, all surface must be clean, dry and free from mill scale. Blast cleaning to 2.5 grade of international standard to ISO 8501/1: 1988 is the only satisfactory method of preparing steel surfaces. Manual or mechanical chipping, scraping, and wire brushing to St 3 grade of international standard is recommended only where blast cleaning is not feasible.
SPECIAL INSTRUCTION
Thinner consumption may vary depending upon site conditions. Practical covering capacity depends on application techniques, ambient conditions, wastage, surface condition etc. Surface temperature must be 3oC above Dew Point to prevent condensation.
Temperature
Air: 5 - 40oC
Surface: 5 - 50oC
Enter Buying Requirement Details
Other Products in 'Paint & Allied Products' category
"We are mainly dealing with bulk quantity order inquiries."
Contact Details
EMPEROL COLOURS PVT. LTD.
GST : 27AABCE4738R1Z1
GST : 27AABCE4738R1Z1
- 28, Vallabh Society, 90 Feet Road, Pantnagar, Opp. Kailash Tower, Ghatkopar East, Mumbai - 400075, Maharashtra, India
- Phone :08045801830
- Fax :91-22-212148
- Send Inquiry
Send InquiryKey Personnel
- Mr. Kishan Shrimali (Managing Director)
- Mobile :08045801830
- Mr. Kapil Shrimali (Business Executive)
- Mobile :08045801830
 |
EMPEROL COLOURS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |