We are actively engaged in processing high quality Epoxy Floor Coating. The offered coating is formulated under the guidance of skilled professionals utilizing high grade chemicals at par with international quality standards. This epoxy finish paint is tested on various quality parameters to ensure it's quality as per the set industry standards. This coating is used for applying on structural steel, pipelines, storage tanks, etc, subjected to aggressive environments. Suitable for application on concrete walls and columns, it can also be used in fertilizer plants, chemical units, tank farms, offshore installations and various other industries including aqua culture. Furthermore, clients can avail this Epoxy Floor Coating from us at reasonable prices.
Features:
High adhesion power
Chemical and oil resistance
Accurate composition
Long shelf life
RECOMMENDED USAGE
Volume Solids | 80+3 % |
Mixing Ratio Base: Hardner | 4 : 1 by volume |
Recommended D.F.T. | 100- 150 microns |
Theoretical Coverage at given D.F.T. | 5-8 m2/ltr |
Technical Specifications
Type | Two Pack |
Colour | Desired shades |
Gloss | Glossy |
Induction Time | 30-45 mins. |
Pot Life | 4 - 6 hrs. at 30oC |
Curing Mechanism | Solvent release and chemical reaction between Base and Hardener |
Flash Point | Not below 25oC |
Drying Time(30oC) | |
Touch | 3-4 hrs |
Handle | 8-10 hrs. |
Hard | overnight. |
Full Cure | 7 days. |
Recoating Time | Min. - overnight Max. 5 days |
Thinner | Emperol Epoxy Thinner |
Thinner Consumption | |
Brush / Roller | 0-5 % |
Conventional Spray | 5-10 % |
Airless Spray | 0-5 % |
Applied Over | Epoxy primed surface. |
Application Method | Brush / conventional / Airless spray. |
Shelf Life | 12 months in a sealed container under normal storage conditions. |
SURFACE PREPARATION
Primed surface must be clean, dry, free from moisture and other contaminants.
SPECIAL INSTRUCTION
Thinner consumption may vary depending upon site conditions. Practical covering capacity depends on application techniques, ambient conditions, wastage, surface condition, porosity of the concrete etc., and varies upto 50% and 60%.
Surface temperature must be 3oC above Dew point to prevent condensation.
Temperature
Air: 5 - 40oC
Surface:5 - 50oC
EMPEROL COLOURS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |